Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Chainrings
$24.00
SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.
$25.00 - $80.00
Replacement PowerGlide ring for 11 speed crankset.
- Compatible with Asymmetrical Yaw front derailleurs
- Bolt Circle Diameter (BCD): 110 BCD
- Material: Aluminum
$80.00
Replacement PowerGlide rings for 11 speed crankset.
- Compatible with Asymmetrical Yaw front derailleurs
- Bolt Circle Diameter (BCD): 110 BCD
- Material: Aluminum
$881.00 - $1,452.00
- AXS enabled for easy monitoring and firmware upgrades
- Fully integrated power meter into a direct mount chainring
- Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride
- Power balance measures left and right legs separately
- SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control
- Laser-etched chainring finish is more durable
- 8-bolt direct mount compatibility only to RED and Force eTap AXS cranks.
- Speeds: 12
- Chainring material: Aluminum
- Power Meter Type: ANT USB
$22.00 - $165.00
Shimano Ultegra 6800 11-Speed Inner Chainrings
- Material: Aluminum
- Ring Position/Type: Inner
$57.99 - $69.99
Genuine replacement parts
Get back on your bike with these replacement chainrings.
Replacement chainring for your eBike.
- Compatible with Bosch Gen 4
- With spider and bash guard
$9.00 - $37.00
Shimano SLX M660 9-Speed chainrings get your drivetrain back to optimal operation.
$180.00
Next level spin.
The forged one-piece design of the SpideRing is a handsome piece of engineering and one of the finest front shifting sets available.
Where it thrives:
The open road, up and down hills
What it's built for:
Durability, efficiency
Highlights:
- One-piece technology makes for reduced weight and increased stiffness and durability
- Fully "ramped" for flawless shifting through detailed machining
- Eye-catching and unique design
$32.00 - $58.00
Shimano Dura-Ace 9000 11-Speed Chainrings.
- Chainring BCD: 110 Shimano Asymmetric
- Color: Black
- Defined Color: Black
- Drivetrain Speeds: 11
- Material: Aluminum
- Ring Position/Type: Inner
$43.00
- CNC machined 7075/T6 aluminum with thick and thin tooth design for maximum chain engagement
- Long tooth profile enhances chain retention
$47.00
The megatooth design allows you to put all of your power through without worrying about dropping your chain. All sizes of these chainrings are steel and range from 32T to 34T.
- CNC machined 7075/T6 aluminum with thick and thin tooth design for maximum chain engagement
- Long tooth profile enhances chain retention
- Shifting ramps and stainless steel pins on outer rings
- Black anodized with CNC silver
- Laser-etched logo
$85.99 - $89.99
Narrow/Wide tooth design for chain retention on 1x systems
- 10 or 11 speed compatible
- Mud clearing channels
- CNC 7075 Swiss Alloy
$54.99
- CNC-machined 6061-T6 aluminum with rounded tooth profile to reduce chain wear
$213.00
- 12 speed Record / Super Record chainring
- Surface treatment improves durability
- 145 BCD outer rings are specific to Record or Super Record, while 112 BCD inner rings are shared between the two groups
$84.95
Wolf Tooth Direct Mount Chainrings for Trek TQ E-Bike Motors are compatible with all Boost and Super Boost bikes that use the Trek TQ Motor. This brings a lightweight chainring with patented Drop-Stop® technology to e-bike chainrings for the first time. Direct Mount Chainrings for Trek TQ E-Bike Motors are machined with 7075-T6 aluminum at Wolf Tooth in Minnesota, USA.
Compatibility:
- Chainring is compatible with only TQ Motor drive systems
- 55 mm chainline
- Available in two different tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop B for all 9, 10, and 11spd chains or 12spd SRAM Eagle, SRAM Flattop Road or Transmission (T-Type), KMC, Connex or Wippermann chains.
DROP-STOP B
- Compatible 9, 10, 11, and 12s SRAM Eagle, 12s SRAM Transmission (T-type) Flattop, 12s Campy, 12s KMC
- Not compatible with 12s Shimano HG+ chains
DROP-STOP ST
- Compatible with 12s Shimano Hyperglide+ chain and 12s KMC chain only
- Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain
Tech Specs:
- Weights: 30t/64g | 32t/69g
- Material: 7075-T6 aluminum
- Made in the USA
$81.95
More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you'll wonder why you waited so long to try oval.
Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body's natural biomechanics. Here's how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what's known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you're climbing.
We've also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone.
Compatibility:
- These rings are for use with Shimano 110 BCD Asymmetric 4-bolt cranks.
- Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703 or 4700, Sora R3000 or R3030, and Claris R2000 or R2030 cranks.
- Sizes 40T and larger are compatible with Dura Ace 9100, Ultegra 8000, and 105 R7000 but a slight modification is required due to a change in the crank arm profile. The 38T chainring will not work for this modification. Click here to review the process for the modification, which takes about 5 minutes to perform.
- NOT compatible with Dura-Ace R9200, Ultegra R8100, and 105 R7100 Cranks
- Mounts in the big ring position of the cranks but is offset inward for perfect chainline.
- The stock 2x bolts will not work. You will need our 6mm bolts which are optimized for single ring mounting.
- Wolf Tooth's patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
- Chainline - 47.5mm
DROP-STOP A
- Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12s SRAM Eagle, KMC, Wippermann, etc.
- NOT compatible with 12s SRAM Transmission (T-Type) Flattop, 12s Shimano HG+, or 12s Campy
DROP-STOP B
- Compatible 9, 10, 11, and 12s SRAM Eagle, 12s SRAM Transmission (T-type) Flattop, 12s Campy, 12s KMC
- Not compatible with 12s Shimano HG+ chains
Recommendations -
- If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! Without these precautions, you may experience chaindrops and/or chainsuck.
- Recommend the use of a clutch style rear derailleur for the best chain security.
Tech Specs:
- Weight: 38t/66g | 40t/74g | 42t/81g
- Material: 7075-T6 aluminum
- Made in the USA
$79.95
Looking for a 1X chainring for your new Shimano XT, SLX or Deore crankset with the proven chain retention of our Drop-Stop® chainrings? Wolf Tooth has what you need in the form of a beautifully machined asymmetrical 96 mm BCD that provides the ideal 1X chainline of 49mm.
Note -
The 28T and 26T sizes will mount to the inner 64 BCD mounting position on these cranksets.
Compatibility:
- These rings fit on the Shimano XT M8000, SLX M7000, Deore M6000, or FC M5100 1x or 2x cranksets
- Not compatible with Deore triple (3x) cranksets
- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
- Provide a great chainline on most Boost bikes. See this explanation for details.
- Drop-Stop A models will reduce the chainline (inward towards the frame) from the Shimano specified chainline for the crankset: 26T-28T = -3mm, 30T-34T = -2mm, and 36T-38T = -1mm
- Drop-Stop ST models will have the same chainline as the Shimano specified chainline
- 10mm bolts are optimized for mounting this ring
- Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A.
DROP-STOP A
- Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc.
- NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy
DROP-STOP ST
- Compatible with 12spd Shimano Hyperglide+ chain and 12spd KMC chain only
- Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain
Recommendations -
If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck.
Tech Specs:
- Weight: 26t/42g | 28t/50g | 30t/41g | 32t/50g | 34t/59g | 36t/69g
- Material: 7075-T6 aluminum
- Made in the USA
$89.00 - $99.00
SRAM's X-Sync 11-speed chainring features tall teeth with an alternating tooth profile to hold the chain amazingly well and still provide space for mud to clear.
- Drivetrain Speeds: 10, 11
- Material: Aluminum
- Ring Position/Type: Chain Retaining Single Ring
$33.99 - $38.99
FSA Pro Road Chainrings deliver flawless shifting for any road drivetrain.
- Precision CNC machined AL7075/T6 alloy
$96.00
Full Speed Ahead chainrings have powered multiple World, Tour de France, and Olympic champions, and will exceed your expectations.
- Chainring can be used with FSA SL-K 90 BCD inner chainrings
- Precision CNC-machined AL7075/T6
- Shifting ramps and stainless steel pins on outer rings
- Laser-etched logo
- Compatible with FSA Modular crankset (Gossamer / Energy / SL-K / K-FORCE)
- Drivetrain Compatibility: Shimano 10/11-speed, SRAM 10/11-speed, FSA 11-speed, Campy 10-speed
$55.99 - $65.99
Origin-8's Alloy Ramped Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with 8-, 9- and 10-speed drivetrain components. They have ramped teeth and are pinned for superior shifting and durability, and feature an attractive and corrosion-resistant black anodized finish.
$61.99
absoluteBLACK Premium Oval 110 BCD Road Chainrings utilize absoluteBLACK's top-tier design features to greatly improve traction and speed. They are for use with all pre-2014 Shimano 5-bolt cranks, such as Dura-Ace FC7950, Ultegra FC6750, Shimano 105 5750, and more. Optimized with smooth shifting in mind, premium chainrings have a 6-point ramp and recess design. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability.
- Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding
- Chainring design reduces the possibility of leg cramps and allows you to maintain a better cadence while climbing
- Use with absoluteBLACK long chainring bolts
- If only switching the inner chainring to oval, use all original crank bolts
- 6.5% ovality is ideal for road climbing
$73.66 - $142.84
Gates Carbon Drive CDX Front belt drive rings are crafted with 6061 aluminum and work well for high-mileage touring or rugged off-roading.
- Constructed of 6061 aluminum
- 11mm pitch
- CDX CenterTrack belts, cogs and rings do not interchange with any part of a CDC/CDX MudPort system
$74.00
Rugged durability comes naturally to the X0 Eagle T-Type direct mount chainring. Finished with a distinct, dual-spoke design your shifting will never be compromised.
- 3mm offset
- Light weight and incredibly durable aluminum chainring
- 8-bolt direct mount design (Mounting bolts included)
- Compatible with SRAM T-Type chains
$50.00
Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.1mm thick so they work well with 9-speed chains.
$39.99
Origin-8's Alloy Ramped Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with 8-, 9- and 10-speed drivetrain components. They have ramped teeth and are pinned for superior shifting and durability, and feature an attractive and corrosion-resistant black anodized finish.
$77.49 - $87.49
The new FLT 12 SPD chainring has an updated tooth profile optimized for SRAM Flattop 12 SPD chains. Easton direct mount rings use a new narrow/wide design specifically tailored to road/cx/gravel applications. The individual tooth profile has moved from the traditional symmetrical shape to more directional specific design with the intention to create a positive chain roller engagement to help with chain retention, critical to prevent chain slip and bounce over rough terrain.
Compatible, but not optimized for, 11-speed chains. Ring only. Crankarms and spindles sold separately.
- EA90 SL Alloy
- Optimized for 12-Speed Flattop Chains
- Cinch System Compatible
- Variable Tooth Width
- Optimized Retention via Directional Tooth Design
- Weight Complete: 442g 172.5mm 40t w/o BB
- Chainline: 47mm
$64.99
Shimano XT CRM80 1x11 Chainrings
- Hollow gear construction for optimized rigidity, weight, and rigidity
- Durable teeth using plated steel construction supported by a carbon composite (CFRP) carrier body
- Dyna-Sys11 HG-X11 11-speed chain compatible
- Chainring BCD: 96 Shimano Asymmetric
- Color: Black
- Drivetrain Speeds: 11
- Material: Steel/Carbon
- Ring Position/Type: Chain Retaining Single Ring
- Tooth Count: 30
$29.99 - $99.99
The all new Turbine 11 Speed rings are ready to ride. Completely redesigned from the ground up, these rings shift like nothing else. The Turbine rings are machined from 7075 aluminum, so they are built to last.
Rings are CNC'd from 7075 alloy, creating a ring with instantaneous smooth and quiet shifting, even under load. These 2x rings are super stiff at a minimal weight, resulting in a ring that demonstrates sharp and quick shifts while being highly resistant to impacts.
$75.00
A direct mount Retainer ring option designed specifically for the Hope RX Crankset. Designed to be compatible with 9/10/11 and 12-speed drivetrains including SRAM T-Type and Shimano HG+.
- Asymmetric tooth profile engineered for cross-compatibility and functionality with different drivetrain systems
- Improved mud-shedding capability
- Improved chain retention
- Better performance with extreme chain angles on modern 1 x drivetrains
- Tooth profile allows for more chain wear before function is compromised, extending service life
- Spiderless rings have a new leg design with improved strength and stiffness
- Narrow/wide tooth profile to keep the chain where it should be
- Direct mount retainer ring designed specifically for our RX crankset
- Optimized 45mm chainline
- No need for separate spider and bolts for a lighter setup
- CNC machined in 7075-T6 aluminum
- Weight: 38T – 94g | 40T – 104g | 42T – 114g | 44T – 125g
Page 1 of 10
Next page